Notes

Slide Show

Outline

1	Certification of Salvaged Platforms
2	Salvage To Re-Install
3	Overview Minerals Management Service (MMS) Attendees Review and Discuss Section 15 Positive Material Identification (PMI) Demo - Office NDE Process Caisson Certification PMI Demo-Yard
4	MMS Attendees
5	Section 15 – Highest Priority Items Secure original drawings and year installed Planned service life at new location Design to 33 KSI – if original record unavailable Section 15.2.3.2 Material – Joint Cans requiring Grade 50 KSI Perform Brinell Hardness to verify tensile and yield strength Perform Positive Material Identification (PMI) to verify chemical composition – Mn greater than 1.33 is Grade 50
6	PMI Demo - Brochure
7	PMI Demo – A36 and Gr 50 Plate
8	PMI Demo – Brinell Hardness Test
9	PMI Demo - Test
10	PMI Demo - Test
11	PMI Demo - Read Out
12	PMI Verification – Grade 2H50
13	PMI Verification – Grade A36
14	NDE Process Engineering company selects which nodes to perform NDE per Section 15 Contractor blasts nodes to near white NDE company performs NDE Photos taken Report submitted to Engineering company
15	NDE Report-Jacket Node Drawing
16	Blasted Node
17	NDE Report-Jacket Node Test Report
18	Engineering Report – MMS Submittal
19	Caisson Certification Original Drawing of Salvage Material Locate Certified Material on New Caisson NDE 100% Girth Weld/10% Long Seam PMI Test each Can/Joint of Pipe
20	Caisson Certification
21	Caisson Certification – Drawing As Built
22	Caisson Certification – Final Drawing
23	PMI Demo – Test
24	PMI Demo - Test
25	Leader In Re-Certification of Salvage Platforms